Coil width tolerance = Plus ZERO, Minus .010"
Coil ID range 20-24"
Coil OD maximum 48"
Each coil must be seperated with one inch slats. Slats must be of suitable material so not to cause rust.
Craft paper or other method must be applied to the shipping skid to prevent rust caused by coils laying directly on the skid or stacked skids.
Maximum coil weight = 5000#
Maximum lift weight = 5000#
Steel deliveries accepted 7am to 4pm Monday-Thursday only unless specifically authorized.
Material is SIDE unload, EYE to the sky.
Material that has visual damage or rust will not be unloaded.
Mill Stain, Black Patch, or other discolored areas are not allowed and will be rejected.
Camber: Material that has camber of more than one inch in six (6) feet shall be rejected.
COIL SET or CROWN is not allowed under any conditions.
Material received with cardboard or other fillers to take up slack during the slitting process will be rejected.
Each LIFT must be tagged with the following:
Handling charges will be applied to any rejected material.
Coating thickness certification required for ANY coated materials (e.g. Galvanized, Zinc Nickel, Aluminized, etc.)
Material composition certification required with each shipment. Product may not be unloaded without certs.